This month’s exclusive offers give you the chance to stock up for less. Get your workstation spick and span with our different absorbent bundle offers. 

To start off strong, we are offering a fantastic Absorbent Starter Bundle at £495 which includes 9 cases of absorbents: 3 x Absorbent Socks, 3 x Absorbent Pads and 3 x Absorbent Rolls. If you already own our Mouldpro Absorbent Trolley, you can go for Absorbent Bundle for £295 which includes nine cases of absorbents. 

 Which Absorbents Are Included? 

The Bundles consists of nine cases of three different absorbents: rolls, socks and pads which are all essential to prevent hazardous liquids from spreading or causing workplace accidents. They offer rapid response for spills and improve safety by reducing slip risks. Ensuring that your warehouse is running through correct environmental compliance is extremely important. Our absorbents in the bundle are all versatile manging spills of oil, chemical or general water-based liquids.

Essential Spill prevention Tips for a Safer Workplace HSE (Health, Safety and Environment)

Workplace spills can lead to safety hazards and environmental issues causing costly clean-up efforts. Spills can cause serious slip-and-fall incidents, damage equipment, and contaminate work areas that could lead to regulatory issues.  

Due to high-risk hazards involving extreme temperatures, immense pressure and heavy machinery in the plastic injection moulding industry, workers safety is utmost important. Failure to maintain strict safety protocols can lead to severe injuries and among the most common cause of injury in a warehouse environment is slips, trips and falls.  

Prevent Spills and save money, protect workers and stock up. 

Our March Consumables offer is to help you be safe, save up and get an Absorbent Trolley while the stock lasts!  

Immediate Response: Slips, Trips and falls are among the most common workplace injuries. Stocking up on consumables will ensure you will never run out and be prepared. 

MMS120 General Purpose Absorbent Socks acts as a containment and a first line of defence when a base of the machine is leaking. It can be placed around injection moulding machines where hydraulic oils or chemicals might leak onto the floor. 

MMP100 General Purpose Absorbent Pads are the rapid removal solution once a spill is contained. They are used to mop up the bulk of up-to 85 litres of liquid. Its medium weight bonded for extra strength & fine fibre finish for low linting properties that leaves the surface significantly drier and safer for foot traffic almost immediately. 

MMR40 General Purpose Absorbent Rolls are large sheets with perforated surface which has a thousand absorbent uses. In areas where slips are constant risk such as under a machine that constantly drips, it can be laid down to create a non-slip surface to walk on while simultaneously soaking up any excess oil, coolants, solvents, and water. 

Regulatory Compliance and Workers Safety: Adhering to legal standards at a workplace and following regulations from HSE (Health, Safety and Environment) prevents workplace injuries and fatalities. Absorbent Trolly are specialised mobile units designed to store, transport, and deploy spill control materials. It offers significant health and safety benefits by facilitating immediate response to hazardous liquid spills. 

The key to HSE Standards: An absorbent trolley prevents workplace injuries and fatalities by providing rapid, on-the-go containment of hazardous liquids and reducing the risks associated with manual cleaning. Our Mouldpro absorbent trolley, is set on two braked castors and two standard castors so it can be safely secured at the location of spillage allowing for a quick and easy clean up. It is custom designed to house 1 box of MMP100 General Purpose Absorbent Pads, 1 box of MMS120 General Purpose Absorbent Roll.